2016 New Holland Construction L228

MoreLess
2 Speed, Hand and Foot Controls, HVAC, Air Seat, Hyd Coupler, Performance Package, Hi Beam Kit, 12x16.5 Tires, New Bucket
  • 2016
  • New Holland Construction
  • L228
  • Base
  • General
  • Bucket hinge pin: 123 in (3287 mm) | Bottom of level bucket, fully raised: 122.6 in (3115 mm) | Clearance circle without bucket: 56.2 in (1428 mm) | Clearance circle rear: 70.4 in (1789 mm)
  • Without attachment with coupler 117.8" (2993 mm)
  • Dump reach (max height) 32.3 in (821 mm) | Height to top of ROPS: 78.7" (1998)
  • 52 in (1322 mm)
  • (bottom of belly pan) 8 in (203 mm)
  • 40.7 in (1034 mm)
  • 69.6 in (1768 mm)
  • Dump angle: 54.7° | Rollback, bucket on ground / at full height: 33.8°/84.8° | Angle of departure: 23.5°
  • 8245 lbs (3740 kg)
  • Rated operating load, 50% tip: 2800 lbs (1270 kg) | Breakout force: Lift cylinder 6030 lbs (27.3 kg) / Bucket cylinder: 8620 lbs (38.3 kg) | Tipping load: 5600 lbs (2540 kg)
  • FPT /F5H FL463A*F001
  • 3.9 x 4.3 in (99 x 110 mm)
  • 3.9 x 4.3 in (99 x 110 mm)
  • 207 in³ (3.4 L)
  • HPCR Direct
  • Turbocharged Aftercooled with external EGR
  • Gross: 74 hp (55 kW) @ 2500 rpm / Net: 68 hp (51 kW) @ 2500 rpm (Per SAE J1349)
  • Peak Torque 232 lb-ft (314 Nm) @ 1400 rpm
  • Low Range: 7.0 mph (11.3 km/h)
  • Pump flow, Standard Flow: 24.2 gpm (91.5 Lpm)
  • 3046 psi (210 bar)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $34,900.00
  • Kansas City, MO
  • Pre-Owned
  • 12238
  • 2016
  • New Holland Construction
  • L228
  • NGM415198
  • 650
  • Available
  • Dump reach (max height) 32.3 in (821 mm) | Height to top of ROPS: 78.7" (1998)